# Tool Tether and Tool Lanyard: Types, Capacity and How to Choose in Canada

> How to choose a tool tether or tool lanyard: bungee, coil, retractable, wrist and hard hat styles, working capacity ratings and ANSI/ISEA 121, with the 3M DBI-SALA and Ergodyne Squids range ERE supplies.

- **URL:** https://www.ereinc.com/blogs/field-notes/tool-tether-tool-lanyard-types-capacity-and-how-to-choose-in-canada

A tool tether (also called a tool lanyard) connects a hand tool, phone or hard hat to the worker or to a fixed point so that a drop stops at the end of the cord instead of at the ground. To choose one, match the rated working capacity to the tool's weight, pick the cord style that suits the job (bungee, coil or retractable), and check the connection points at both ends. This guide compares the 3M DBI-SALA and Ergodyne Squids tool tethers and lanyards that ERE Inc. supplies in Canada.

**Key takeaways**
- **Rate the tether to the tool.** Listings state a maximum working capacity: 10 lb (4.5 kg) for the Ergodyne Squids 3100 and 3100F(x), and 15 lb (6.8 kg) for the Squids 3105, each with a 2:1 safety factor.
- **A tool tether is not fall protection.** Its rating is a few pounds, so it never replaces a harness, lanyard or lifeline for a person.
- **Pick the cord by the job.** Bungee for reach, coil for low snag risk, retractable for adjustable length, wrist and hard hat styles for the body.
- **Tether both ends.** A tether only works if the tool attachment point and the anchor point are both secure.

**In this guide**
- [What is a tool tether and why use one?](#what-is)
- [Bungee, coil or retractable: which tool tether style fits?](#types)
- [How much weight can a tool lanyard hold?](#capacity)
- [Which tool tethers and lanyards does ERE supply?](#range)
- [How to choose a tool tether](#choose)
- [Frequently asked questions](#faq)

## What is a tool tether and why use one?

A tool tether is a short lanyard, cord or coil that ties a tool, phone or hard hat to the worker's belt, wrist or harness, or to a nearby structure. Its job is to stop a dropped object after a short distance. The hazard is real: the [International Safety Equipment Association](https://safetyequipment.org/worker_protections/dropped-objects-prevention/) reports that more than 45,000 U.S. workers are injured each year in "struck by falling object" incidents, and ISEA publishes a dropped-object prevention standard, ANSI/ISEA 121, to which several of the products below are listed.

Tethers matter most where a dropped wrench or phone can hit people below or fall into process equipment: scaffolds, roofs, towers, tanks and confined-space entries. They sit alongside the fall-arrest equipment in the same kit, such as a [fall arrest harness](/blogs/field-notes/fall-arrest-harness-how-to-read-csa-z259-10-classes-and-choose-in-canada), a [self-retracting lifeline](/blogs/field-notes/self-retracting-lifeline-csa-classes-types-and-how-to-choose-in-canada) and a [roof anchor](/blogs/field-notes/roof-anchor-types-strength-and-how-to-choose-in-canada), but they protect the people and equipment below, not the worker. For general work-at-height duties, start with the [CCOHS fall hazards page](https://www.ccohs.ca/oshanswers/safety_haz/falls.html) and your provincial regulator.

## Bungee, coil or retractable: which tool tether style fits?

Use a bungee tether when you need reach and some shock absorption, a coil when you want the cord to stay compact and out of the way, and a retractable tether when the working length changes through the shift. The main styles compare as follows:

 | Style | Strength | Example from our range

 | Bungee (elastic) | Stretches for reach, absorbs the impact of a dropped tool, reduces snag hazards | Ergodyne Squids 3100 and 3100F(x), 3M DBI-SALA Bungee Tool Tether

 | Coil | Compact, naturally stays out of the way, reduces tangles | 3M DBI-SALA Coil Tool Tether (non-conductive vinyl), Ergodyne Squids 3156

 | Retractable | Length sets or retracts automatically | Ergodyne Squids 3001 (self-setting pawls, up to 48 in.), 3M DBI-SALA Steel Cable Tool Tether

 | Wrist | Limits the drop to arm's length, keeps the tool at hand | Ergodyne Squids 3114 pull-on, Squids 3115

 | Hard hat | Keeps headwear from falling, lets the head move freely | 3M DBI-SALA Hard Hat Tether, Squids 3150, 3155, 3157, 3158

For an electrical environment, note that the 3M coil tether is described as non-conductive vinyl. Confirm the material and any electrical rating on the product page for your own site rules.

## How much weight can a tool lanyard hold?

Check the maximum working capacity printed on the product: it is the heaviest tool the tether is rated to carry. The Ergodyne listings give the clearest numbers:
- The [Squids 3100 Tool Lanyard](/products/ergodyne-squids-3100-tool-lanyard-bungee-carabiner-loop) has a maximum working capacity of 10 lb, sewn onto the product. The [Squids 3100F(x)](/products/ergodyne-squids-3100f-x-tool-lanyard-bungee-carabiner-loop) is third-party certified to the same 10 lb (4.5 kg) and extends from 38 to 48 in. (96 to 122 cm).
- The [Squids 3105 pack of 10](/products/ergodyne-squids-3105-tool-lanyard-bungee-carabiner-loop-pack-of-10) is third-party certified to 15 lb (6.8 kg) with a 2:1 safety factor, meeting ANSI/ISEA 121-2018.
- The [Squids 3114 pull-on wrist lanyard](/products/ergodyne-squids-3114-pull-on-wrist-lanyard-with-carabiner) is tested with a 2:1 safety factor and approved to ANSI/ISEA 121-2018.

A rating of 10 to 15 lb is a tool rating. It is nowhere near the load of a person in a fall, so never clip a tool tether into a fall-arrest system or use it as a body connection. Where a tool is heavier than the rating, use a heavier-rated tether or a different attachment method.

## Which tool tethers and lanyards does ERE supply?

ERE Inc. is a multi-brand distributor, so you can build the tool-tethering kit and the fall protection kit from one supplier. Current ranges include:
- **3M DBI-SALA:** the [Bungee Tool Tether](/products/3m-dbi-sala-bungee-tool-tether-bungee-carabiner-loop) (locking carabiner with screw lock, 5/8 in. tubular webbing), the [Coil Tool Tether](/products/3m-dbi-sala-coil-tool-tether) for phones, radios and cameras, the [Hard Hat Tether](/products/3m-dbi-sala-hard-hat-tether-coil-clip-loop) and the [Steel Cable Tool Tether](/products/3m-dbi-sala-steel-cable-tool-tether-retractable-key-ring), a compact retractor compatible with several 3M holsters, wristbands and pouches.
- **Ergodyne Squids, tool lanyards:** the [3001 retractable](/products/ergodyne-squids-3001-tool-lanyard-retractable-carabiner-loop), the [3100 Extended](/products/ergodyne-squids-3100-extended-tool-lanyard-bungee-carabiner-loop) and the [3156 coil](/products/ergodyne-squids-3156-tool-lanyard-coil-carabiner-loop) (48 in. extended, ANSI/ISEA 121-2018).
- **Ergodyne Squids, body and hard hat:** the [3115 wrist](/products/ergodyne-squids-3115-wrist-tool-lanyard), the [3150](/products/ergodyne-squids-3150-elastic-hardhat-tool-lanyard-bungee-buckle-loop) and [3155](/products/ergodyne-squids-3155-elastic-hardhat-tool-lanyard-bungee-clamp-loop) elastic hard hat lanyards, and the [3157](/products/ergodyne-squids-3157-hardhat-tool-lanyard-coil-clip-loop) and [3158](/products/ergodyne-squids-3158-hardhat-tool-lanyard-coil-clamp-loop) coil versions.
- **Attachments:** the [Squids 3703 Tool Tails](/products/ergodyne-squids-3703-elastic-loop-tool-tails-tool-tether-attachments-pack-of-3) (pack of 3) create an attachment point on a tool, belt or harness, and the [Squids 3151 coil lanyard](/products/ergodyne-squids-3151-coil-lanyard-swivel-hook-and-detachable-loop) uses adhesive mounts for phones and small accessories.

Browse the full [fall protection collection](/collections/fall-protection) for harnesses, anchors and connectors. Specifications and availability change, so confirm details on the product page or ask us.

## How to choose a tool tether
- **Weigh the tool.** Choose a tether whose stated working capacity is above the tool's weight, and pay attention to heavier tools such as impact drivers.
- **Pick the cord style.** Bungee for reach, coil for compact work, retractable for variable length.
- **Pick the body or hard hat attachment.** Wrist and hard hat lanyards suit light items worn on the body; belts and harness points suit larger tools.
- **Check the tool end.** The tool needs a captive hole, a barrel lock, a cinch loop or a Tool Tail attachment, because the weakest link decides the result.
- **Check the standard.** Look for ANSI/ISEA 121 on the data sheet and ask your site for any additional requirement.
- **Inspect before each shift.** Replace tethers that are frayed, stretched out or have a damaged carabiner.

**Need tool tethers for a crew or a shutdown?**

Tell us the tools, their weights and the work at height, and we will match tethers and attachments.

[Request a Quote](/pages/request-a-quote) | [Fall protection collection](/collections/fall-protection)

## Frequently asked questions

## What is a tool tether?

A tool tether is a lanyard, coil or retractable cord that attaches a tool to a worker or structure so that a dropped tool stops at the end of the cord rather than falling to the ground.

## What is the difference between a tool lanyard and a tool tether?

In practice the terms are used for the same family of products. Ergodyne calls its range Squids tool lanyards, and 3M DBI-SALA calls its range tool tethers.

## How heavy a tool can a tool lanyard carry?

Check the stated working capacity. For example, the Ergodyne Squids 3100 is rated 10 lb and the Squids 3105 is certified to 15 lb with a 2:1 safety factor.

## Can a tool tether be used for fall protection?

No. A tool tether is rated in pounds for a tool, not for a person. Use a certified harness, lanyard or lifeline for fall arrest.

## What standard covers dropped-object tethers?

ANSI/ISEA 121 covers dropped-object prevention solutions in the United States. Several Ergodyne Squids listings state approval to ANSI/ISEA 121-2018. Confirm what your Canadian site or regulator requires.

## Related articles
- [Fall arrest harness: how to read CSA Z259.10 classes](/blogs/field-notes/fall-arrest-harness-how-to-read-csa-z259-10-classes-and-choose-in-canada)
- [Self-retracting lifeline: CSA classes and how to choose](/blogs/field-notes/self-retracting-lifeline-csa-classes-types-and-how-to-choose-in-canada)
- [Rope grabs: types, rope match and how to choose](/blogs/field-notes/rope-grab-types-rope-match-and-how-to-choose-in-canada)
- [Roof anchors: types, strength and how to choose](/blogs/field-notes/roof-anchor-types-strength-and-how-to-choose-in-canada)

*Lire en français : [Attache-outil et longe d'outil : types, capacité et choix au Canada](/blogs/perspectives-securite/attache-outil-longe-types-capacite-et-choix-au-canada)*
